spTsrv Protocol Translator

Terminal Server

The spTsrv product is a multi-channel Terminal Server with support for both bit and byte protocols. It supports DNP, Modbus, and other async protocols, it is one of the few, if not the only, Terminal Server that supports legacy protocols such as Conitel and CDC. With a host interface based on TCP/IP, the spTsrv can be used with user application software on a wide range of operating systems including Windows, Unix/Linux, and derivatives.


Overview

The spTsrv is a hardware device for data acquisition that supports over 40+ protocols, both legacy and byte oriented over serial and IP networks. The product enables digital transformation of utilities enabling legacy migration, Serial to IP Migration and acting as terminal server, protocol translator and bridge.

spTsrv comes in three form factors supporting 4, 8 and 16 channels. The base unit is 1U height. The 8 and 16-channel units come in a 19” rack-mount metal enclosure and operate on 110/220 VAC. The 4-channel unit is shelf mount with standard power of 5 or 12 VDC. Other power options are available on all units. The enclosure front contains a power LED, operational LEDs, and a serial maintenance port. System information is available through the maintenance ports or via a network connection. The enclosure back contains RJ-45 connectors for Ethernet and serial RS-232 ports. Each serial port includes transmit and receive data LEDs, and supports TxD, RxD, RTS, CTS, DCD, ground, and synchronous clock RS-232 signals.


Key Features

  • Serial
  • Speed
  • Network
  • Maintenance

  • Serial Communications
  • Support Utility

  • Power
  • Temperature
  • Surge Withstand
  • Activity LEDs

THE SPTSRV PRODUCT IS AVAILABLE WITH THREE APPLICATION PACKAGES :
  • Protocol Translator – For operation as a protocol translator or data concentrator with current support for about 40 protocols. Also supports data transfer between masters.
  • Terminal Server –  For operation as a terminal server interfacing to customer-written master station software. Its biggest advantage in this form is support for older legacy protocols
  • Bridge – For operation as a network bridge, the more conventional terminal server usage. Inserting units at master and remote sites convert serial to network communication and back again without any changes at the master or remote sites. A single host utility can configure all devices on the network. RTU’s can be located with communication optimized to their location even when the device is moved to a different channel.

SAMPLE USAGES:
  • Protocol Translator to convert between different bit or byte protocols
  • Multi-host a remote device using the same or different protocols
  • Data concentrator
  • System load testing; replicate one device to 100’s to introduce a load for testing a new master
  • Passive master point check to listen on communication of an existing master/RTU network, extract data, and forward that data as simulated RTUs to a new master
  • Replace old serial and leased line communication with networks

Plus, all have the ability to interact remotely with an ASE2000. ASE2000 version 2, release 16 or later can connect to a spTsrv unit and present communication data at any remote location just as if it were at the spTsrv site.

Read More
img

Make An Enquiry

Get in touch with us to Know More.

Contact Us